2018 Dodge Dart HID How to Install HID Xenon
2018 Dodge Dart HID How to Install HID Xenon – Hi Dodge readers mania welcome to my weblog. It was an crucial pleasure to be as shortly as extra contained throughout the interim to share particulars relating to the newest dodge automotive analysis. On this occasion, I is also reviewing the Best dodge engine strongest engine ever constructed .Hopefully, this textual content material materials supplies provides offers presents can current extra knowledge to you. Well, for a great deal of who ought to get updates concerning the most recent dodge auto automotive and observe the event of our weblog net web web net internet internet web page for a great deal of who occur to want to know additional ,please come as shortly as further go to as shortly as additional with our weblog dodgereviewsrelease.com
The kit includes the wiring harness Ballasts, two 9006 HID bulbs which have been specificallymodified by XenonSupply to fit this particular housing, 3M mounting pads and zip ties. Here are the tools that we’ll beusing today ten millimeter socket, socket wrench, and wire cutters. Alright in this step what we’re gonna do is thatwe’re gonna remove the cable from the bulb and then connect it tothe signal cable from the wiring harness.
Now what we’vedone in this step is actually taking the wheel off so we can get better visibility of thisparticular access panel which has a cool little head light signal sign right here but for you at home you don’t have to do that you just need to have long arms so go aheadand take the door off which is relatively simple, which I saidwas relatively simple I’ll go ahead and take that off and if you can seethere’s a little knob there, it’s a dust cover a simple left-handed turn will takethat off and now we’ll take out the bulb.
It’s aleft-handed kind of a quarter turn. There we go, there we go good And just like that, you have the bulb, the cable, you can see there’s a simple locking mechanism. Alright what we’re gonna do now is we’re gonna drill a 1 1/4 inch hole through the dust cover so that the wiring from the bulb can fit through and then as you can see the grommet will justfit into the hole so it protects, and creates a seal for the wiring for thebulb Here’s the dust cover with the lightbulb and wiring completely assembled together what we want to do is take this stock connector here and plug it to the cable that once housed the light bulb and now we’re going to connect the bulb itself and its connected let me get my hand out.
- Great, now we’re ready to put the dust cover in.
- A simple twist will do.
- Yeah, alright we’re good.
There you go, it’s real simple First we’re gonna go throughthe installation of the wiring harness here’s one packaged now we got one that’s already splayed out now the installation of the wiring harness is mandatory to prevent damage to the ECU The wiring harness consists of fivedifferent connectors You’ve got the ballast connector we’ve got one on each side of the vehicle here is onehere the other’s right here you got the signal connector and you gotthe power connector which is gonna fit on the positive terminal of the battery you’ve got either one or two of the groundconnectors which will fit on the chassis Alright so here we’re gonna show you how to installthe power and ground from the wiring harness.
First what youwanna do is open the connector for the positiveterminal just unlatch. It’s relatively simple we’ve already takenthe liberty of loosening this particular bolt so just make the proper connection and tighten You can do that at home You do the exact same thing with theground and tighten once you’ve made proper connection.
Now if you end up making all the connections and gothrough all this you realize your lights don’t work you may wanna check the ground connector. Sometimes paint will prevent the connection from going through fully, so you may need to scrape off some paint off the bolt or the washer making sure theconnection is solid also make sure that the signal connector cable is, there’s noslacker so it will reach the housing Alright, this is the signal connector fromit’s one of the connectors from the wiring harness, this is from the ballast, and the three of these run out from the dust cover so what you’re gonna do there is a lot amale to female parts is going to connect them there it’s simple Alight, once that’s done you can go ahead and tidy up and you’re good to go.
Now we’ll show how to connect the ballast as you can see here’s the ballast connector which Idiscussed earlier there’s a snap-on mechanism whichcorresponds to a locking piece and what you’ll do is simply connect and make that nice little click-y sound and make sure you’ve got a nicefirm connection as you can see the ballast has already been installed on other side I’m sorry connected on theother side what you wanna do in the interm ishouse the ballast in
the well here until everything’s been complete make surethat everything’s working and then at that time we’ll go ahead andproperly mount those First we’re gonna test theheadlights make sure that everything is working and once everything is working we canproperly mount the ballast Okay and we’re almost done here allwe need to do now is mount the ballasts I have already used one of the mounting pads on oneside all you do is you take the adhesive off go ahead and place it in the well make sure that it’s secure.